How to find out the VID and PID of a flash drive: 7 simple and convenient ways

Determining the VID and PID of the flash drive

USB sticks are reliable devices, but there are certain risks of breakage. This can be caused by unsuccessful formatting, firmware failure, incorrect operation, etc. If the damage is not physical in nature, then it can be repaired using software tools. Not all tools are now suitable for recovering specific flash drives. If you use the wrong utility, you can permanently damage the drive. If you know the vid pid of the flash drive, then you can determine the type of controller, and then select the appropriate program.

How to find out the VID and PID of a flash drive

How to find out the VID and PID of a flash drive

The VID is used to identify the manufacturer, and the PID is used to identify the device. All controllers on the external storage are marked with these values. Some manufacturers may disregard the paid registration of ID numbers, and simply write them at random. This mainly concerns cheap products from China.

First, you should make sure that the flash drive is detected by the computer in some way:

  1. Displayed in Task Manager, even as an unknown device.
  2. Visibility in the list of connected devices.
  3. The appearance of a characteristic sound when connected.

In other cases, there is almost no chance of determining the VID and PID, and you will not be able to recover the media.

For a quick identification of the ID-number, specialized programs are suitable. As an option, you can use the "Device Manager" or disassemble the flash drive. Similar information is written on the insides.

MicroSD, SD, MMC cards lack VID and PID values. If you apply one of the methods to them, then the card reader identifiers will be available.

Let's look at ways to find out the vid and pid of a flash drive.

Method 1: ChipGenius

The utility perfectly reads the necessary technical information not only from flash drives, but from a large number of other devices. ChipGenius has its own VID and PID database, from where the presumptive information about the device is obtained when, for various reasons, the controller cannot be polled.

To use the program, you must follow the instructions below:

  1. Launch. Select a flash drive at the top of the window.
  2. The VID and PID will be shown below the USB Device ID parameter.

If you use old versions of the application, then incorrect work is possible. In some cases, the software may refuse to work with the USB 3.0 interface.

This utility provides more complete information about the USB flash drive, which includes the VID and PID.

After starting the program, follow these steps:

  1. Launching software. Select the "Get information about a USB flash drive" option.
  2. The required identifiers will be at the top of the list. They must be selected and copied by pressing "CTRL + C".

Method 3: USBDeview

The main function of the application is to display a list of all devices that have ever connected to a PC. You can additionally get the necessary information about them.

Instructions for use:

  1. Launching the utility.
  2. To quickly search for a connected drive, click "Options", and then remove the selection from the item "Show disconnected devices".
  3. When the search circle narrows down, you need to double-click on the flash drive. A table will open where the VendorID and ProductID are indicated, which are the VID and PID identifiers. These values ​​can be selected and copied.

Method 4: ChipEasy

A utility with an intuitive interface that provides comprehensive information about the flash drive.

After downloading the application, the following actions are performed:

  1. Launching software.
  2. The required drive is selected at the top of the workspace.
  3. Below are its technical parameters. The second line displays VID and PID. They can be selected and copied.

Method 5: CheckUDisk

The simplest program that can display basic data about the drive.

Follow-up instruction:

  1. Launching the program.
  2. Selecting the required flash drive.
  3. Acquaintance with the data. The second line contains VID and PID.

Method 6: Examining the board

When the above methods do not help, then you can move on to drastic measures. The body of the flash drive is opened, if there is such an opportunity. If the VID and PID are not found there, then the controller label will be of particular value. It is the controller that is the most important part of the flash drive. It is distinguished by its square shape and black color.

How do I use these values?

Now you need to apply the information received and search for an effective utility to start working with a USB flash drive. There are services on the Internet that have databases of similar programs:

  1. VID and PID are entered in the corresponding panel. "Search" is pressed.
  2. The search results will contain the necessary information about the drive and links to the appropriate version of the utilities.

Method 7: Device Properties

The method is not very practical, but you don't need to use third-party software. The following actions are implied here:

  1. Go to the list of devices. Right-clicking on the flash drive and selecting "Properties".
  2. Go to the "Equipment" tab. Make two clicks on the name of the flash drive.
  3. Go to the "Details" tab. It is worth choosing in the drop-down menu "Properties", and there "ID equipment". The "Values" section will show the VID and PID.

This can be done in the "Device Manager":

  1. Calling the device manager: in "Run" enter devmgmt.msc and click "OK".
  2. Search for a flash drive, right-click on it, select "Properties", and then follow the instructions above.

A non-working flash drive can be displayed as "Unknown USB device".

The fastest way is to use one of the utilities provided. If you do without software, then you must use the properties of the drive. As a last resort, VID and PID are available on the internal board of the flash drive.

Software recovery of flash drives

Probably a USB drive, but in the common people “ flash drive »Is the most unreliable source of information storage. Indeed, sometimes you do not expect at all that it will fail at the most inopportune moment. To minimize this problem, I advise you to always safely remove connected devices. This applies not only to flash drives, but also to portable hard drives or all sorts of USB adapters. To safely remove a flash drive, click on the arrow at the bottom right and select the safe removal icon from the drop-down list. Then, by clicking on it, click on the icon - " Extract Device ".

Software recovery of flash drives
Software recovery of flash drives

Of course, the degree of life of a flash drive depends greatly on the quality of manufacture, components and the manufacturer itself.

So, something happened and your flash drive is out of order. First of all, pay attention to the drive itself - it should not be physically damaged. Otherwise, the problem may be trite in a broken board. Further, when connected to a computer, your "device" is defined as " Removable drive ", And when you try to open it, the system writes -" Insert the disk into the "Removable Disk" device ".

Software recovery of flash drives

If, when connected to a computer, the system does not react in any way to the inserted flash drive, then most likely it is no longer possible to help it. Perhaps from careless handling, the head of the flash drive was simply soldered off the board in an elementary way. In this case, it is recommended to disassemble and use a magnifying glass to check the soldered contacts.

Software recovery of flash drives

If your flash drive has ceased to be detected, there is no way to open it, or it simply does not allow information to be recorded and formatted, then not everything is lost! In 80% of cases, your device can be repaired and the problem lies in the elementary output of the controller.

The whole process of restoring such a drive does not exceed 10 minutes. To reanimate a flash drive, you need to select the desired program that works directly with this device controller. There is no universal program and the main task is to find the right software for work.

First of all, we need to define “ VID "And" PID »USB stick. Naturally, the flash drive must be inserted into the USB-socket of the computer and the system must somehow react to it.

The first way to determine "VID" and "PID"

You need to go to " Device Manager »Windows systems. To do this, right-click on the icon "This computer" select - " Properties ", In the opened window we find" Device Manager ".

Software recovery of flash drives

Or you can make it easier: press the key combination - " Windows + R "Enter the command -" devmgmt.msc ", Press" Enter ".

We find the item - " USB Universal Serial Bus Controllers ", In the drop-down list we find -" USB storage device ".

Software recovery of flash drives

Right-click on " Properties ", Then select the item -" Intelligence ", In the drop-down list we find the item -" Equipment ID codes ".

Software recovery of flash drives

We find what we need " VID "And" PID ". The information line - USB \ Vid_13fe & Pid_3600 - contains the values ​​we need, that is Vid - 13fe , and Pid - 3600 .

Software recovery of flash drives

The second way to determine "VID" and "PID"

For the second method, you will need a utility - ChipGenius_v4_19_0319 ... Download it somewhere, unpack and run the file - ChipGenius_v4_19_0319.exe ... The USB stick should naturally be inserted into the computer. Usually, the program itself finds the flash drive, but if it does not find it, find it in the upper part of the utility window. Below, in the second half of the program window, you will see complete information about your drive, there you can also find “ VID "And" PID "(On the screenshot below the data of another flash drive).

Software recovery of flash drives

After you have found " VID "And" PID »Go to the site - http://flashboot.ru/iflash/ ... We insert data into the columns of the same name at the top of the site, press the search button - " Search ". The site will give you a large list of flash drive names, with detailed information about chips, manufacturers, etc. In the extreme column on the right, you will see the name of the flasher that works with the controller of your device. If the column with the utility name is empty, see below, look for similar flash drive configurations.

Software recovery of flash drives

In my case, this is a utility - " Phison PS22xx Formatter v2.10.0.2 ". We go to Yandex and drive in the next search query - “ Phison PS22xx Formatter v2.10.0.2 download ". The first link in Yandex leads to our site, flashboot.ru , from where you can download the desired program and in the same place we looked for its name, driving in Vid and Pid.

Software recovery of flash drives

Theoretically, you could use the search on the site itself, using the name of the utility “ Phison PS22xx Formatter v2.10.0.2 », But unfortunately the search queries on the site do not work. I don’t know what it’s connected with, perhaps with the old site engine.

Software recovery of flash drives

It will also not be superfluous to read the comments to this program. Very often people provide valuable advice and links. This is especially true if the program for some reason did not work and the flash drive did not recover.

Software recovery of flash drives

So, download the utility, unpack it into any folder, run it. Usually a window appears notifying us that all data on the drive will be deleted.

Software recovery of flash drives

Next, the process of restoring, formatting or something similar takes place, depending on the software applied to the flash drive.

Software recovery of flash drives

The model of the USB drive after this procedure may change, for example it became for me - USB DISK 30X .

Finally, I would like to say that everything does not always go smoothly. Sometimes you can't find a suitable model in the list of flash drives, sometimes you don't immediately find the utility you need. In such cases, you need to try the programs that are next to the list and search for them in Yandex search.

If none of the methods helps, you can open the case of the flash drive, perhaps you will not find Vid and Pid there, but you will see the brand of the controller, with which you can search for the necessary utility for your flash drive.

Software recovery of flash drives

Of the 10 killed flash drives that I had stored, I restored 6, the other two were not detected in the computer, the rest did not respond to the utilities. Perhaps the matter is in the destruction of the flash card itself.

That's all, go for it, restore your devices, maybe not everything is lost.

If you have been using a USB flash drive for many years, and no problems have arisen, but one day, when connected to a computer, it was identified as an unknown USB device, or it was not identified at all, then you need to deal with the problem. Remember if you dropped it. If there was such a case, then the damage is physical, and these tips will not help.

If you did not use safe removal when disconnecting the USB flash drive from the computer, or it stopped being detected after formatting, then you can use the VID and PID to pick up some program that will help restore the USB drive to work.

What VID and PID are, and how to find out these parameters, will be discussed in this article. VID - identifies the manufacturer, and PID - the device itself. Flash drives manufactured by large firms have specific values ​​for each parameter and are assigned to all USB drives. For example, all Transcend flash drives have a VID of 8564, and a PID of 1000. Some manufacturers leave the VID and PID for the USB drive the same as for the controller installed in it. Well, if you have a cheap Chinese flash drive, then VID and PID are just random, meaningless numbers.

If you format the drive with some unsuitable program, then it may stop working altogether. Let's look at the methods using which it will turn out to find out the values ​​we need. Then you just need to use the online service, which contains a database of suitable programs for restoring a flash drive of a certain model.

Using Device Manager

The easiest way to find out the VID and PID is to look at these values ​​by opening the Device Manager.

In Windows 7, click on the button "Start" and select from the list on the right "Control Panel" ... If you don't have such an item, type "control panel" in the search bar and click on the appropriate result.

If you have Windows 10 installed, then right-click on the button "Start" and choose from the menu "Control Panel" .

Control Panel

Then we expose "View" - "Large icons" , we find in the list "Device Manager" and click on it.

Device Manager

Then double-click on the item "USB Controllers" ... In the expanded list, select "USB mass storage device" and click on it with the right mouse button. If your flash drive is undecided, then you will have an item like "Undefined USB device" ... Next, from the context menu, select "Properties" .

Properties

In the next window go to the tab "Intelligence" ... In the top box "Property" from the dropdown list select "Equipment ID" ... A little lower in the field "Value" VID and PID will be indicated.

Using utilities

There are many programs that will help you find out the VID and PID values ​​of the USB drive. In addition, they will show other information about your device. Let's take a look at a few popular programs.

Flash Drive Information Extractor shows all the information you need about your USB drive. Insert the USB stick into an available USB port and wait a minute. Then run the program and click on the button in the window that opens "Show information about the flash drive" .

Show information

The program will give you the result very quickly. Find the VID and PID fields and see what values ​​your flash drive has.

ChipEasy

ChipEasy will show a little less information than the previous program, but you can see the parameters we need. Run the program and in the upper field, double-click on the desired USB drive.

In the area with detailed information in the field "Device ID" VID and PID will be shown.

ChipGenius

With the ChipGenius program, everything is also very simple. Run it and in the upper area click on the connected USB flash drive to see detailed information about it. Then a little lower in the box "USB Device ID" see the parameters of interest.

USBDeview

The USBDeview program must be selected depending on the bitness of your operating system. If you have 32-bit Windows installed, then select the corresponding USBDeview file and run it, if it is 64-bit, then run the file where the name contains the number 64.

The main window of the program displays all the devices that have ever been connected to your computer or laptop. It can be difficult to find your USB flash drive in this list, so click on the button "Settings" and uncheck the box "Show disabled devices" .

Show disabled devices

Now the main window displays only those devices that are connected to the computer at the moment. Find your device in the list, and click on it.

The properties window will open. In it, we will be interested in two parameters: "Product Code" is the PID, and "Vendor Code" is the VID. The same parameters can be viewed in the lower right field "Device Instance Code".

Device Instance ID

How to look at the USB stick itself

If you cannot find out the VID and PID data using various programs, then you can disassemble the USB flash drive. Do this carefully so as not to damage anything, otherwise the device will definitely become inoperative.

On the board of each flash drive there is a black rectangle or square - this is a controller. You can see the marking on it. For example, a Kingston flash drive has a PS2251-37KS controller. Knowing the marking of the controller, you can also choose the right recovery method for the flash drive.

After you know the VID and PID values, you can use the iFlash online service. Here is a database that is created by the users themselves, which program, which flash drive is best to reanimate.

On the main page of the service, enter your data in the fields "VID" and "PID" and click the button "Search" .

A table appears on the page. The first column will say who the manufacturer is, the second column will contain information about the model. In the column "Chip Model" provides information about the controller.

Find your flash drive according to these parameters, and if you're lucky, the last column will contain the name of the utility that can be used to restore your flash drive.

Bring your flash drive back to life using the right program. You can pick it up by finding out the VID and PID of the USB drive. And you already know how to do this.

Rate article: 1 Star2 Stars3 Stars4 Stars5 stars

(

1

estimates, average:

5.00

out of 5)

Loading...

Share the news on social networks About the author: Oleg Kaminsky

Webmaster. Higher education with a degree in Information Security. The creator of the portal comp-profi.com. Author of most articles and computer literacy lessons

How to find out the VID and PID of a flash drive

USB sticks are reliable devices, but there is always a risk of breakage. The reason for this may be incorrect operation, firmware failure, unsuccessful formatting, and so on. In any case, if it is not physical damage, you can try to repair it using software.

The problem is that not every tool is suitable for recovering a specific flash drive, and using the wrong utility can permanently disable it. But knowing the VID and PID of the drive, you can determine the type of its controller and select the appropriate program.

How to find out the VID and PID of a flash drive

VID is used to identify the manufacturer, PID is the identifier of the device itself. Accordingly, each controller on the removable storage device is labeled with these values. True, some unscrupulous manufacturers may neglect the paid registration of ID numbers and assign them simply at random. But this mainly concerns cheap Chinese products.

First, make sure that the flash drive is somehow detected by the computer: a characteristic sound is heard when connected, it is visible in the list of connected devices, displayed in "Task Manager" (possibly as an unknown device) and so on. Otherwise, there is little chance not only of determining the VID and PID, but also of recovering the media.

ID numbers can be quickly identified using specialized software. Alternatively, you can use "Device Manager" or just disassemble the USB flash drive and find information on its "insides".

Please note that MMC, SD, MicroSD cards do not have VID and PID values. Applying one of the methods to them, you will receive only card reader IDs.

Method 1: ChipGenius

Perfectly reads basic technical information not only from flash drives, but also from many other devices. Interestingly, ChipGenius has its own VID and PID base in order to give out suspected device information when for some reason it fails to poll the controller.

Download ChipGenius for free

To use this program, do the following:

  1. Start it up. At the top of the window, select a USB flash drive.
  2. Below opposite value "USB Device ID" You will see VID and PID.

VID and PID detection via ChipGenius

Please note: older versions of the program may not work correctly - download the latest ones (you can find just one from the link above). Also, in some cases, it refuses to work with USB 3.0 ports.

This program gives more detailed information about the drive, of course, including VID and PID.

Flash Drive Information Extractor official website

After you have downloaded the program, do the following:

  1. Run it and press the button "Get information about a USB flash drive" .
  2. Starting parameter measurement in Flash Drive Information Extractor

  3. The required identifiers will be in the first half of the list. They can be selected and copied by clicking "CTRL + C" .

Determining VID and PID via Flash Drive Information Extractor

Method 3: USBDeview

The main function of this program is to display a list of all devices ever connected to this PC. Additionally, you can get detailed information about them.

Download USBDeview for 32-bit operating systems

Download USBDeview for 64-bit operating systems

The instructions for use are as follows:

  1. Run the program.
  2. To quickly find the connected drive, click "Options" and uncheck the box "Show disabled devices" .
  3. Configuring the display of the list of devices in USBDeview

  4. When the search circle has narrowed, double-click on the flash drive. In the table that opens, pay attention to "VendorID" и "ProductID" - this is VID and PID. Their values ​​can be selected and copied ( "CTRL" + "C" ).

Determining VID and PID via USBDeview

Method 4: ChipEasy

An intuitive utility that allows you to get comprehensive information about the USB flash drive.

Download ChipEasy for free

After downloading, do this:

  1. Run the program.
  2. Select the drive you want in the top box.
  3. Below you will see all its technical data. VID and PID are on the second line. You can select and copy them ( "CTRL + C" ).

Determining VID and PID via ChipEasy

Method 5: CheckUDisk

A simple utility that displays basic information about the drive.

Download CheckUDisk

Further instructions:

  1. Run the program.
  2. Select the USB stick from the top.
  3. Check out the data below. VID and PID are located on the second line.

Determining VID and PID via CheckUDisk

Method 6: Examining the board

When none of the methods helps, then you can take drastic measures and open the case of the flash drive, if possible. You may not find the VID and PID there, but the markings on the controller have the same value. The controller is the most important part of the USB drive, it is black and square in shape. USB stick controller modelWhat to do with these values?

Now you can start using the information received and find an effective utility for working with your flash drive. To do this, use iFlash online service , where users themselves form a database of such programs.

  1. Enter the VID and PID in the corresponding fields. Click the button "Search" .
  2. Entering IDs on iFlash

  3. In the results, you will see general information about the flash drive and links to suitable utilities.

IFlash search results

Method 7: Device Properties

Not such a practical method, but you can do without third-party software. It involves the following actions:

  1. Go to the list of devices, right-click on the flash drive and select "Properties" .
  2. Go to the properties of the flash drive in Windows

  3. Go to the tab "Equipment" and double click on the name of the media.
  4. Go to device properties in Windows

  5. Go to the tab "Intelligence" ... In the dropdown list "Property" select "Equipment ID" or "Parent" ... In field "Value" it will be possible to parse VID and PID.

Determining VID and PID through device properties in Windows

The same can be done via "Device Manager" :

  1. To call it, enter devmgmt.msc in the window "Run" ("WIN" + "R" ).
  2. Calling Device Manager on Windows

  3. Find the flash drive, right-click on it and select "Properties" , and then everything is according to the instructions above.

Go to device properties in Device ManagerPlease note that a non-working flash drive may appear as "Unknown USB device" .

The fastest, of course, will be to use one of the utilities considered. If you do without them, you will have to delve into the properties of the storage device. In extreme cases, VID and PID can always be found on the board inside the flash drive.

Finally, we will say that the definition of these parameters will be useful for performing recovery of removable drives. On our website you can find detailed instructions for representatives of the most popular brands: A-Data , Verbatim , Sandisk , Silicon power , Kingston , Transcend .

CloseWe are glad that we were able to help you solve the problem. CloseDescribe what did not work for you.

Our experts will try to answer as quickly as possible.

Did this article help you?

WELL NO

Sometimes flash drives have malfunctions. Let's analyze those at the logical level. The following malfunctions are possible:

  • not readable;
  • freezes;
  • errors occur during data transfer, etc.

These kinds of problems are fixable and can be eliminated by reprogramming the controller.

What is VID and PID of a flash drive

To restore a flash drive, you need to find out the VID and PID code.

VID and PID are the device developer number and device number, respectively. Identifiers give an idea of ​​what firmware to use. Re-flashing will resume the operation of the flash drive in its original form.

There are 3 ways to find out the above numbers:

  1. Open the case and look at the markings on the chip.
  2. Go to the properties of the flash drive.
  3. Use special programs.

Option number 1 ... It is carried out by opening the plastic shell of the flash drive. The option is unsafe in that it can damage the microcircuits, so this method is recommended to be used as the last resort. After disassembling the case, the number can be seen on the chip.

Option number 2 ... Implies using Device Manager. The procedure is: "Device Manager" → "USB controllers" → "USB storage device", right-click on it and select "Properties" → "Information" → "ID equipment" in the menu. It will write something like the following:

USB VID_25EN & PID_2100 & REK_0001

After VID_… - a four-digit alphanumeric designation, this is VID, in our case - 25EN.

After PID _… - PID code, its number will be 2100.

Option number 3 ... Simple and accurate because programs were designed specifically to determine these values. Let's take a look at the most popular and affordable platforms.

CheckUDisk

CheckUDisk

It is easy to understand, the utility is intuitive.

  1. Double click on the shortcut to activate the software.
  2. From above, select the broken USB flash drive.
  3. Its properties are written below. The first lines are VID and PID.

Flash Drive Information Extractor

With this program, you get more characteristics about your flash drive, including VID and PID.

  1. Double click on the shortcut to activate the software.
  2. We click on "Get information about the USB flash drive".
  3. The necessary information is written at the top.

You can download the latest version of the program from our website.

ChipEasy

ChipEasy

Similar to the previous platforms, the data about the flash media is provided in an accessible and understandable way. It also has a simple algorithm for obtaining codes.

  1. Double click on the shortcut to activate the software.
  2. In the upper window, click on the name of the flash drive.
  3. In the lower window there will be a list, select and copy the lines with VID and PID.

USBDeview

USBDeview

With this utility, you can not only find out the identifiers, but also see the entire history of the USB devices ever connected to the PC. The software has the function of viewing information about these devices.

  1. Double click on the shortcut to activate the software.
  2. To find the desired flash drive from the list of all devices, go to the "Options" tab and remove the checkbox "Show disabled devices".
  3. After the previous step, the list of gadgets will decrease, and it will be easy to find a USB flash drive. Click on the name, a description of the flash drive will appear. We need a line with the VendorID and ProductID values ​​- these are the same required recovery codes, copy them.

Instructions for selecting a utility for firmware

Now, having the manufacturer identification number (VID) and device code (PID), we proceed to the selection of the firmware. With their help, we will select software for the controller. At the moment, there are various Internet resources with lists of flash drives, where software suitable for their firmware is registered.

  • You can use the flashboot.ru database:
  • The "iFlash" tab, in the VID and PID cells, enter the previously defined numbers. Based on the search result, we get a list of similar flash drives.
  • We choose the one that matches the name, model and volume. The “UTILS” column will contain the name of the utility that can be used to flash the flash drive.
  • Copy the name and on the same page at the top, click the "Files" tab. In the search field, insert the name, click "Search". If the database contains the required flashing, then to the right of the name, click "Download".
  • If not found, you can use the search engine and find the program on any other similar resource. Also download to your PC.

Remember that before installing or unzipping the downloaded utility, be sure to check the program for malicious files, including adware.

Instructions for flashing a flash drive

Disconnect the USB flash drive before starting the firmware ... Unzip the downloaded software. Examine the attachments in a folder called readme.txt. This file contains instructions for using the platform, or information about where this instruction can be downloaded. Run the .exe file.

We connect a USB flash drive ... The software identifies it and the name appears. After starting the utility, click "Start" and the flashing process will be launched.

Important! At this moment, you can not under any circumstances remove the USB flash drive.

After the end of the process, the system will offer to format the removable drive, but you should first reconnect it. Next, Windows will install the driver, now you can format the USB flash drive.

Добавить комментарий